| Weight | N/A |
|---|---|
| Material | sheet steel (galvanized), stainless steel V2A, stainless steel V4A |
| Nennweiten (mm) | 100, 1000, 1120, 125, 1250, 140, 150, 160, 180, 200, 224, 250, 280, 300, 315, 355, 400, 450, 500, 560, 600, 630, 710, 80, 800, 900 |
| Order example | ABSB + angle + DN |
| Version | 90°, 135° |
Exhaust bend
Blow-out bend as segmental bend with attached slanted spigots
and integrated protective grille. Design with overlapping socket.
Painting in all RAL standard colors possible.
Note:
Blow-out bends are conditionally flame-proof. When the exhaust air system is not in operation, moisture, snow or dust can get into the pipe system. This can lead to water accumulation. Therefore, a condensate drain should be provided below the bend. At high humidity and temperatures below freezing point, there is a risk of icing of the protective grille.
You can find further roof attachments and suitable roof ducts with our configurator at:
rooftop.rokaflex.com
